| GRADE
CHART FOR METAL CUTTING TIPS
|
RCL GRADE
|
AREA
OF APPLICATION |
RP
20 |
-
For semi finishing and finishing of steel
- Fairly high toughness with good wear resistance
- Used for deep hole boring, Suitable for continuous and interrupted
cuts under favorable working conditions |
RP
30 |
-
For roughing, semi finishing and finishing of steel and steel castings.
- Very high toughness, resists shock loading. Excellent wear resistance
properties.
- Used for turning and copy turning of forgings or castings
with hard skin, with interrupted cuts. |
RP
40 |
-
For roughing and semi finishing steel and steel castings
- Extremely tough grade
- Used for rough milling, turning, planing on less rigid machines
with low speed, high feed and heavy depth of cut |
RK 05
|
-
For precision machining of Grey Iron, Chilled Iron, non- ferrous
alloys, non-metallic materials and hardened steels
- Extremely flank wear resistant grade
- Used for precision turning, finish boring of Grey Iron,
high Silicon, Aluminium alloys, bearing
metals, plastics and asbestos materials.
|
RK 10
|
- For semi finishing and finishing Cast Iron and non-ferrous
alloys
- High hardness combined with toughness
- Used for finish turning Grey Iron with sand inclusion. Machining
shortchipping materials and alloys of Magnesium - Aluminium
and non - metallic materials.
|
RK
20 |
- For roughing, semi finishing and finishing of Cast Iron,
non - ferrous alloys
- Flank wear resistant grade
- Used for turning, milling and drilling grey Cast Iron. Machining
hard wood, wood base laminations, plastics and ceramics |
All
rights reserved to RAPICUT
CARBIDES LIMITED
|
